Welcome!

Microservices Expo Authors: Elizabeth White, Liz McMillan, Pat Romanski, Yeshim Deniz, Zakia Bouachraoui

Related Topics: Microservices Expo, Industrial IoT, Microsoft Cloud, Machine Learning

Microservices Expo: Article

Network Topology Diagram

The choice of network hardware and software used in a company depends on the network topology

First of all, it's worth mentioning that the choice of network hardware and software used in a company depends on the network topology. But the topology, in turn, depends on the company's needs and requirements. Thus, the competent network topology increases the efficiency of all the organization and allows you not to distract your colleagues if one of the LAN components falls out. In addition, the intimate knowledge of the network topology allows the IT manager to evaluate its bottlenecks, and to plan further connections of the network devices and PCs better. Apart from everything else, the system administrator has to detect and recover any network failure as fast as possible. But if the company's network is complex and consists of dozens or hundreds PCs, servers, switches, printers, and other devices, it is not always possible to understand what the problem is and where to go to recover the failure. With the network diagram you always could view and try to understand where the defective device is, on which floor, in which office, etc.

But what if you are a newbie in the organization or have been sent by outsourcing company to solve specified problems? In this case, discovering and building the network diagram topology can take more than an hour, and if the network is rather complex, this procedure can take even a few days. Are there any instruments that allow drawing the network diagram effortlessly? If there are switches supporting the SNMP protocol on the network, the system administrator can use the specialized network discovery software that is available on the market. This software allows creating network diagrams automatically. All the process will take a few steps:

  1. Install the network diagrammer program on the admin's PC.
  2. Scan your entire network in order to detect all the network devices. If your switches support the SNMP protocol, the program will detect connections between devices automatically.
  3. If some connections between devices have not been detected because of some reasons (for instance, the existing security policy does not allow using the SNMP protocol on some devices), the system administrator can complete and draw the diagram manually using the internal diagram editor. Also, he is able to arrange devices by groups as they arranged by the rooms and offices in the company's building, draw areas, and add necessary labels.

The network topology diagram is ready. All the devices that are connected to the LAN, and links between them are located on the map.

So, the network mapping process takes three steps only, but these 3 steps can help you to improve your LAN reliability, your employees and the entire organization. Creating a network topology diagram will save system administrator's nerves and time, allowing him to solve more important issues related to the network operation, such as, optimizing and upgrading the system, analyzing the LAN structure, maintaining the technical documentation, etc.

More Stories By Dmitriy Stepanov

Dmitriy Stepanov is a CEO at 10-Strike Software, Network Inventory, Network Monitoring, Bandwidth Monitoring Software developer. 10-Strike Software is a software developing company. They offer their high quality networking products since 1999. 10-Strike Software specializes in producing Windows network software for corporate users.

Microservices Articles
"We do one of the best file systems in the world. We learned how to deal with Big Data many years ago and we implemented this knowledge into our software," explained Jakub Ratajczak, Business Development Manager at MooseFS, in this SYS-CON.tv interview at 20th Cloud Expo, held June 6-8, 2017, at the Javits Center in New York City, NY.
CloudEXPO New York 2018, colocated with DXWorldEXPO New York 2018 will be held November 11-13, 2018, in New York City and will bring together Cloud Computing, FinTech and Blockchain, Digital Transformation, Big Data, Internet of Things, DevOps, AI, Machine Learning and WebRTC to one location.
DevOpsSummit New York 2018, colocated with CloudEXPO | DXWorldEXPO New York 2018 will be held November 11-13, 2018, in New York City. Digital Transformation (DX) is a major focus with the introduction of DXWorldEXPO within the program. Successful transformation requires a laser focus on being data-driven and on using all the tools available that enable transformation if they plan to survive over the long term.
Enterprise architects are increasingly adopting multi-cloud strategies as they seek to utilize existing data center assets, leverage the advantages of cloud computing and avoid cloud vendor lock-in. This requires a globally aware traffic management strategy that can monitor infrastructure health across data centers and end-user experience globally, while responding to control changes and system specification at the speed of today’s DevOps teams. In his session at 20th Cloud Expo, Josh Gray, Chie...
Containers and Kubernetes allow for code portability across on-premise VMs, bare metal, or multiple cloud provider environments. Yet, despite this portability promise, developers may include configuration and application definitions that constrain or even eliminate application portability. In this session we'll describe best practices for "configuration as code" in a Kubernetes environment. We will demonstrate how a properly constructed containerized app can be deployed to both Amazon and Azure ...
Most DevOps journeys involve several phases of maturity. Research shows that the inflection point where organizations begin to see maximum value is when they implement tight integration deploying their code to their infrastructure. Success at this level is the last barrier to at-will deployment. Storage, for instance, is more capable than where we read and write data. In his session at @DevOpsSummit at 20th Cloud Expo, Josh Atwell, a Developer Advocate for NetApp, will discuss the role and value...
Modern software design has fundamentally changed how we manage applications, causing many to turn to containers as the new virtual machine for resource management. As container adoption grows beyond stateless applications to stateful workloads, the need for persistent storage is foundational - something customers routinely cite as a top pain point. In his session at @DevOpsSummit at 21st Cloud Expo, Bill Borsari, Head of Systems Engineering at Datera, explored how organizations can reap the bene...
In his session at 20th Cloud Expo, Scott Davis, CTO of Embotics, discussed how automation can provide the dynamic management required to cost-effectively deliver microservices and container solutions at scale. He also discussed how flexible automation is the key to effectively bridging and seamlessly coordinating both IT and developer needs for component orchestration across disparate clouds – an increasingly important requirement at today’s multi-cloud enterprise.
In his session at 20th Cloud Expo, Mike Johnston, an infrastructure engineer at Supergiant.io, discussed how to use Kubernetes to set up a SaaS infrastructure for your business. Mike Johnston is an infrastructure engineer at Supergiant.io with over 12 years of experience designing, deploying, and maintaining server and workstation infrastructure at all scales. He has experience with brick and mortar data centers as well as cloud providers like Digital Ocean, Amazon Web Services, and Rackspace. H...
SYS-CON Events announced today that DatacenterDynamics has been named “Media Sponsor” of SYS-CON's 18th International Cloud Expo, which will take place on June 7–9, 2016, at the Javits Center in New York City, NY. DatacenterDynamics is a brand of DCD Group, a global B2B media and publishing company that develops products to help senior professionals in the world's most ICT dependent organizations make risk-based infrastructure and capacity decisions.